Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
4. Unscrew the top cover from the connector (E)
and keep it for later use.
5. Insert wire from low-voltage transformer (sold
separately) into the connector (E) and retighten
the top cover removed in step 4 until the contact
pins completely pierce the plastic shield of the
wire.
CAUTION: The wire used with the connector (E) is
less than 8 in., wire type is SPT-2W 221
oF
18AWG*2C 300V.
5
Lowes. co m/po rtfol io
Publicité
