Publicité
Les langues disponibles
Les langues disponibles
10
3.18 Searching for the lock number and cabinet number:
1. If you forget the cabinet number, you can swipe your card in the configuration
device to check it.
2. If you need this feature, please let us know before placing your order.
3. Configuration device required.
3.19 Configuration of card usage period:
1. By configuring the period of use of the card you can ensure that the lost card will
not be used by an unauthorized person.
2. To prevent users from using the locker for a longer period of time, configure the
period of use of the user card.
3. If you need this feature, please let us know before placing your order.
4. Configuration device required.
3.20 Card initialization.
1. If you need to delete an unused card, use the configuration device to initialize the
card.
2. Initialize the information on the card (manager, user, deletion card, etc.).
3. If you need this feature, please let us know before placing your order.
4. Configuration device required.
3.21 Low voltage warning
1. When the battery voltage drops below 4.5 V, the light will turn blue and two beeps
will be emitted to remind the user to replace the battery.
2. If the voltage drops below 4 V, the lock cannot be closed until new batteries are
installed.
3. After a low voltage warning, the lock should operate for 1,000 more cycles.
4. It is also possible to configure the lock so that it opens automatically when the
voltage reaches a level below 4 V. If you need this feature, please let us know before
placing your order.
3.22 Activation and deactivation of the sound signal.
1. To deactivate the sound signal, swipe the deactivation card in the lock. This will
turn off the sound signal.
2. To activate the sound, use the activation card.
10
Publicité
