Home Decorators Collection BREEZEMORE 71456 Guide D'utilisation Et D'entretien page 12

Assembly - Attaching the Accessories
1
Installing the bulbs and glass bowl
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off the light and replacing the bulbs
with the correct wattage bulbs.
NOTE: To utilize the dimming functionality, install 60-Watt (max)
incandescent bulbs.
□
With the power off, install the two incandescent bulbs (I)
(Max. 60W, not included) by screwing into the light bulb
sockets.
□
Place the glass bowl (H) into the light kit assembly, aligning
the three flat areas on the top flange of the glass bowl (H) with
the three raised dimples in the light kit assembly. Turn the
glass bowl (H) clockwise until it stops.
I
G
H
12