Operator's Manual
INSTALLATION
INSTALLATION
Read safety warnings before setting-up the unit.
Ensure the oil level in the unit's pump is adequate. If low, add SAE-30W non-
detergent oil.
LOCATION:
In order to avoid damaging the unit, do not incline the unit transversely or
longitudinally more than 10°.
WARNING: RISK OF ASPHYXIATION! DO NOT OPERATE IN AN
ENCLOSED AREA. USE THIS PRODUCT ONLY IN WELL
VENTILATED AREAS!
CONTAINS CARBON MONOXIDE, A POISONOUS, ODORLESS
AND INVISIBLE GAS.
SERIOUS INJURY, ILLNESS AND POSSIBLE DEATH.
WARNING: RISK OF EXPLOSION OR FIRE CAUSING SERIOUS
INJURY OR DEATH! DO NOT ALLOW THE ENGINE OR
MUFFLER TO COME IN CONTACT WITH FLAMMABLE VAPORS,
COMBUSTIBLE DUST, GASES OR OTHER COMBUSTIBLE
MATERIALS. A SPARK MAY CAUSE A FIRE.
WHEN USING THE UNIT FOR SPRAY PAINTING, PLACE THE UNIT
AS FAR AWAY FROM THE WORK AREA AS POSSIBLE, USING
EXTRA AIR HOSES IF NEEDED.
Place unit at least 12 inches away from obstacles that may prevent proper
ventilation. Do not place unit in an area:
- where there is evidence of oil or gas leaks.
- where flammable gas vapors or materials may be present.
- where air temperatures fall below 32°F or exceed 104°F.
- where extremely dirty air or water could be drawn into the unit.
SERVICE TRUCK INSTALLATION:
Installations may vary. Mounting should be done to a rigid frame member.
Installer is responsible for securing the equipment in a safe manner.
8 Gallon Units:
Recommended Hardware: 854-0093 (Dome Isolators)
30 Gallon Units:
Optional Hardware: 854-0093 (Dome Isolators)
16
THE EXHAUST FROM THE ENGINE
BREATHING THE GAS CAN CAUSE