Power Fist 9159013 Instructions De Montage page 4

9159013
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
1. Insert the foam paddings (#7) into
the bottom bike holders (#5).
Refer to Fig. 1. Set aside.
2. Attach the adjustable racks (#6) to the
top bike holders (#4) using wing-nut
screws (#10). Refer to Fig. 2. Set aside.
3. Slide the top bike
holders (#4) and
I-tubes (#2) into the
U-tubes (#1). Refer to Fig. 3.
4
Truck Bed 4-Bike Rack
1
For technical questions call 1-800-665-8685
7
5
6
4
4
2
V1.0
Fig. 1
10
Fig. 2
4
Fig. 3