fortress S410 Manuel D'utilisation page 45

18.4 CHECKING THE TIRES
Check the tires at least once a week for signs of wear
and damage.
Check for:
Excessive wear on the tire tread.
Uneven wear over the surface of the tire.
Cuts or holes in the tire tread.
Cuts or holes in the tire walls.
Sharp objects stuck in the tire.
Tire pressures.
Tire studs/nuts are tight.
Damage to wheel rims.
Foreign materials/contaminants.
(FIG.18.40-18.41)
WARNING!
Put the scooter in drive, switch the scooter off and
remove the key before carrying out the checks.
Never use the scooter if the tires are found to be
defective after carrying out the above checks.
Wear protective gloves if you have to physically touch
the tires or undercarriage and afterwards wash you
hands thoroughly.
18.5 WHEEL SIZES
FIG.18.18 FIG.18.19
19.0 Nameplate
The nameplate is located on the seat post of the
scooter, as well as on a label in the Owner's Manual.
The nameplate indicates the exact model designation
and other technical specifications. Please provide the
following pieces of information whenever you have to
order replacement parts or to file a claim:
*CE for Europe only for the S425 & S700
MANUFACTURER
Sunrise Medical GmbH
Kahlbachring 2-4
D-69254 Malsch,
Germany
NOTE: The above serial number diagram is an example
only. Actual weights and numbers will vary according to
product type.
Due to our policy of continuous improvement in the
design of our wheelchairs, product specifications may
vary slightly from the examples illustrated. All weight/
dimensions and performance data are approximate and
provided solely for guidance.
Sunrise Medical complies with the EU Medical Devices
Directive 93/42/EEC
.
All wheelchairs must be used in accordance with the
manufacturer's guidelines.
Manufactured :
www.SunriseMedical.
,
Fortress S-Series 45