Device-Specific Safety Instructions; Laser-Specific Handling Rules - KALEAS LDM 500-60 Mode D'emploi

!
Utilize only batteries, power packs and system voltage intended for
use in this specific device. Otherwise, the device may pose a fire haz-
ard.

Device-specific safety instructions

!
Use the device and related accessories only according to the in-
tended use as well these instructions.
!
Before using, check the device for possible damage. Do not use it
if the safety is in doubt.
 Ensure the device is protected when storing it and out of the reach
of children.
 Protect the device against moisture, corrosive substances, direct
sunlight, extreme temperatures and wide temperature fluctuations.
 Avoid heavy vibrations or jolts, and never drop the device or use
force.
 Keep the device away from electromagnetic sources such as induc-
tion heating and electrical welding devices. Avoid static charges
since these may damage the device.
 Avoid accidentally switching on the device. Make sure it is switched
off when inserting batteries.
 Do not block openings on the device.

Laser-specific handling rules

!
A laser emits an extremely intensive beam of light.
Improper use can cause accidents, severe damage and
permanent eye injury.
!
Do not point the laser beam at people or animals,
and do not look into the direct or reflected beam.
!
Do not aim the laser beam toward reflecting surfaces, as they
may divert the beam and cause injuries.
!
If a beam is directed at your eyes, close them and move your
head immediately away from the beam.
!
Do not use optical instruments such as magnifying glasses, tele-
scopes, eyeglasses or other lenses to observe the source of the
beam or to modify the laser beam.
38
LDM 500-60 ENGLISH
© KALEAS GmbH & Co. KG