Publicité
Les langues disponibles
Les langues disponibles
CONTROL BUTTONS (Back Rocker functions)
The OSD control buttons are shown as the figure. Models of the same series are only different in button position and
panel pattern. Please refer to the practical model.
Power light indicator:
When the display is working normally, the indicator light is ON.
When it's in energy saving state the indicator light blinks. When the signals are sent again in the energy saving state,
display will return to normal work.
When monitor is turn OFF the indicator light will be OFF. As the display is still powered in the stand by state, we
recommend you to turn it off when not using it (button on back of monitor, long push) and for the sake of safety, the
power cord should be unplugged when display isn't used for a long time.
Initial state ( Hot Key ):
After entering Menu:
To enter the Menu, press the rocker down once.
8
NOTE: To turn monitor power OFF, please press the back rock button for about 2 seconds or more (till it shut down).
Publicité
