Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
WEIGHT DEFROST
The defrosting time and power level are adjusted
automatically once the weight is entered.
1. Press the Weight Defrost button. The display will
show "dEF1".
2. Use the number pad to enter the weight of the
food that will be defrosted between 4 ~ 100 oz.
3. Press the Start/+30SEC button to confirm.
TIME DEFROST
1. Press the Time Defrost button. The display will
show "dEF2".
2. Use the number pad to enter the desired
defrosting time. The maximum time is 99 minutes
and 99 seconds.
3. The default power level is 3, 30%. The display
will show "PL3".
4. To change the power level, press the Power
button and then press the number pad for the
desired power level.
5. Press the Start/+30SEC button to confirm.
ECO FUNCTION
In ECO mode, the display screen will turn off. ECO
function can only in standby mode.
To activate ECO mode, ensure the door is closed
and press the Stop/Clear button once. The screen
will turn off.
Note: pressing any button or opening and closing
the door will cancel the ECO function.
MEMORY
The memory feature allows you to program cooking
times and powers that can be recalled and used
with minimal input. Three memory programs can be
set at one time, they are labeled 1, 2 and 3.
To set Memory 1:
1. Press the 0/Memory button once. The number 1
will display.
2. Press the Time Cook button and then use the
number pad to enter the desired cook time.
3. Press the Power button once. The power level
will default to 100%. "PL10" will display. To
change the power level, use the number pad to
enter the desired power level.
4. Press the Start/+30SEC button to save the
setting.
5. To use the setting in future, press the 0/
Memory button once and when the number 1
is displayed, press the Start/+30SEC button to
begin operation.
To set Memory 2 or 3, press the Memory button two
or three times until the number 2 or 3 are displayed
and then follow the steps above.
Note: If the power is lost or the microwave is
unplugged, the memory settings will need to be
reprogrammed.
13
Publicité
