Panasonic TX-48CW304 Mode D'emploi page 16

Install and Retune Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations.
channel scan Digital Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
analogue stations. Satellite: Searches and stores satellite stations.
(Retune)
Manual
This feature can be used for direct broadcast entry.
channel scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine
You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete
Satellite
satellites or Edit satellite settings on the list. Antenna installation: You can change satellite
Settings
anntenna settings and/or start a satellite scan.
Installation
Displays installation settings menu. Standby Search (Optional): Your TV will search for new
Settings
or missing channels while in standby. Any new found broadcasts will be shown.
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option
List is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed
Network in the channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
English - 16 -