Summit BRF65S Mode D'emploi page 5

Model Numbers
Type
Exterior
Capacity
Electrical Input
Rated Current
Temperature
of Freezer
Refrigerant
Installation
Ship Weight
Unit Dimensions
(W x D x H)
NOTES: * "ADA" models have a 32" height to fit under lower ADA-compliant counters.
Specifications are subject to change without notice.
Before Using Your Appliance:

Remove the exterior and interior packing.

Before connecting the unit to a power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.

Remove the crisper, drip tray and shelves and clean them and the interior surfaces of
the unit with lukewarm water using a soft cloth.
Installing Your Appliance:

Place the unit on a floor that is strong enough to support the appliance when it is fully
loaded. To level the unit, adjust the two leveling legs at the front.

These models are designed to be built-in, but can also be used free-standing. For
built-in installation, keep ¼" (6.35mm) of space on each side and at the top and 2"
(51mm) at the rear. Take care that the air vent at the front of the appliance is never
covered or blocked in any way
Technical Information
BAR63S
ADA63S
BRF65S
ADA65S AR5S
AR5IF
Refrig-freezer All-refrigerator
Black w SS door
Black w SS door
(panel-ready on –IF)
5.5 cu. ft.
5.1 cu. ft.
115V AC/60Hz 115V AC/60Hz
1.3A 1.3A
5°F --------
R134a, 2.3oz. R134a, 2.3oz.
Built-in or Free- Built-in or Free-
standing standing
102 lbs. 102 lbs.
23.63" x 23.5" 23.63" x 23.5"
x 33.25" *
Installation Instructions
.
4
BAR61W
ADA61W
All-refrigerator
White
5.5 cu. ft.
115V AC/60Hz
1.3A
-------
R134a, 2.3oz.
Built-in or Free-
standing
102 lbs.
23.63" x 23.5"
x 33.25" * x 33.25" *