Publicité
STEP 9
(x37)
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully position the unit on it's front. Flush the bottom edge of
the back panel with the bottom edge of the bottom (E). Align squarely and nail (6) straight into
back edges as shown.
Flush edge of back panel
with edge of bottom.
ameriwoodhome.com
6
BACK
PNL
6
Be sure the notch in the
back panel is in this
location.
20
Assure that the unit is
square. Distance from
corner to corner are equal.
Publicité
