Samsung HL-T5089S Instructions Du Propriétaire page 82

Setting Up Anynet +
The following settings are to use Anynet + functions.
To use the Anynet + Function, Anynet + (HDMI-CEC) must be set to On
1 Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Anynet + (HDMI-CEC), then press the ENTER button.
2
Press the ENTER button to select Anynet + (HDMI-CEC), then press the ENTER
3
button.
4 Press the ▲ or ▼ button to select On, then press the ENTER button.
The Anynet + function is enabled.
➢
If you select Off, Anynet + is disabled.
➢
When the Anynet + (HDMI-CEC) function is disabled, all the Anynet+ related
➢
operations are deactivated.
Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
3 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button.
4 Press the ▲ or ▼ button to select On, then press the ENTER button.
The Auto turn off function is enabled.
➢
If you select Off, the Auto turn off function is canceled.
➢
Press the EXIT button to exit.
The Select Device setting of the TV remote control is to be set to TV to use the Anynet + function.
➢
If you set the Anynet + (HDMI-CEC) to On, the Device List menu appears when you press the TOOLS button on the remote control.
➢
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
➢
However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet + Devices
Press the Anynet + button.
1
Press the ENTER button to select Device List.
Anynet + devices connected with the TV are listed.
➢
If you cannot find a device you want, press the red button to scan for devices.
➢
2 Press the ▲ or ▼ button to select to a particular device and press the ENTER button.
It is switched to the selected device.
Only when you set Anynet + (HDMI-CEC) to On in the Setup menu, the Device List menu
➢
appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation
➢
during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
➢
When the device scan is complete, the number of found devices is not displayed.
➢
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is
➢
already on are not displayed in the device list. Therefore press the red button to re-scan devices if necessary.
If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet + function. Make sure to
➢
switch to an Anynet + device by using the Anynet + button.
English - 82
Melody : Medium
Bluetooth
Anynet+ (HDMI-CEC)
SW Upgrade
Function Help : On
Anynet+ (HDMI-CEC) Setup
Anynet+ (HDMI-CEC) : ON
Off
Auto Turn Off :
On
Move Enter
Anynet+ (HDMI-CEC) Setup
Anynet+ (HDMI-CEC) : On
Auto Turn Off :
Off
On
Move Enter
Device List
Headset Connection
Picture Setting
Sound Setting
Sleep Timer Off
Caption Off
Channel Add/Delete
Delete Favorite Channel
▼
Move
Continued...
▶
Return
Return
Enter