Samsung HL-T5089S Instructions Du Propriétaire page 17

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically:
1 Press the POWER button on the remote control.
The message Executes the Plug & Play function when you set the TV at first or
reset it. Sets channels, clock and other functions. is automatically displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select Home Mode when installing this TV at home. is automatically
displayed.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
➢
The default selection is Home.
➢ We recommend setting the TV to Home mode for the best picture in your home
environment.
➢
Shop mode is only intended for use in retail environments.
➢
If the unit is accidentally set to Shop mode, and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the MENU button for
five seconds on the TV panel.
4 Press the ▲ or ▼ button to memorize the channels of the selected connection, then
press the ENTER button.
➢ If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is
connected to ANT 2 IN (AIR), select Air.
➢ If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air +
Cable.
➢ In Cable mode, you can select the correct analog signal source among STD, HRC,
and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have
Digital cable, select the signal source for both Analog and Digital.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The Clock Mode menu is displayed.
➢ To stop the search before it has finished, press the ENTER button with stop
selected.
English - 17
Plug & Play
Executes the Plug & Play function when you set the TV
at first or reset it. Sets channels, clock and other
functions.
OK
Enter
Plug & Play
Select Language of the OSD.
English
Español
Menu Language : English
Français
Move Enter
Plug & Play
Select Home Mode when installing this TV at home.
Shop Home
Move Enter
Plug & Play
Select the antennas to memorize
Air
Cable
Air+Cable
Move Enter
Plug & Play
Selects the cable system.
Analog
STD HRC
Digital STD HRC
Move Enter
Plug & Play
Auto Program in Progress.
Digital Channels are added on the favorite
channel list.
Stop
Enter
Plug & Play
Auto Program is completed.
3 channels are memorized.
Air : 1 Cable : 2
OK
Enter
Continued...
Exit
Skip
Skip
Start
Start
Start
Skip
IRC
IRC
Skip
Cable 10
3%
Skip
Skip