Dovre 18165 Manuel D'instructions page 58

Step 5
Fit the bottom screen to the cradle using 1
screw (M6×12) and secure it to the cradle's
legs using 1 screw (M6×25).
M6×12
Step 6
Place the inner � ange (D), saw blade (G),
outer � ange (E) and 1 nut (M20) on the
motor axle. Hold the outer � ange tightly
and tighten the nut using the two spanners
provided.
58
M6×25
Step 7
Fit the right inner screen (H) and secure it to
the cradle (B) using 2 screws (M6×12). Then
tighten it to the outer screen (F) using screws
(M5×6).