Publicité
Les langues disponibles
Les langues disponibles
4. Rear wheel assembly
Install the rear wheel on the axle,
insert the flat key and tighten bolts.
(See Figure 4)
5. Assemble the adjustable hitch
Ball mount: Adjust the ball mount with the
required height, secure the latch and lock
with pin.
(See Figure 5)
6. Connecting rod assembly
Connect the battery cable from the top tube
of the main frame, and put out from the
round hole in the middle of the connecting
rod (gentle reminding: there are 2 holes
in two side of the main frame and hole
bottom, which are assistant for your
observation during the cable connection.)
(See Figure 6)
Page of 14
7
Publicité
