Hoover HF122CAR 011 Manuel D'utilisation page 10

NOTE: The radiator tool is ideal for cleaning inside and around cabinets, radiators, blinds and more.
NOTE: The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
NOTE: The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
WALL MOUNT*
For storage and space saving, your appliance can be fixed to your wall using the three screws and screw plugs included. [2]
CLEANER MAINTENANCE
Emptying the Dust Container
1. Press the tube release button and remove the tube.
2. Press the Dust flap release button to open the bin flap and empty the contents. [6]
3. Close the dust cup up, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Cleaning the Dust Container and Filter
1. Press the tube release button and remove the tube.
2. Press the dust flap release button to open the bin flap and empty the contents. [6]
3. Press the battery release button and remove the battery pack. [3]
4. Press the dust bin release button and remove the dust bin from the main body. [7]
5. Turn the mesh filter frame unclockwise direction and remove from the product. [8]
6. Press the exhaust filter release buttons to remove the exhaust filter. [9]
7. Remove the sponge from the exhaust filter and take out the exhaust filter from its frame. [10]
8. When cleaning exhaust filter, wash the sponge and the exhaust filter frame in lukewarm water and leave to dry for 24
hours. Please ensure all parts are completely dry before reassembling. [11, 12]
9. When cleaning the single cyclone, wash the mesh filter and dust bin in lukewarm water and leave to dry for 24 hours.
Please ensure all parts are completely dry before reassembling. [11, 12]
10. Ensure it is fully dry before returning to the main body of the cleaner. [12]
NOTE: Do not use hot water or detergents when cleaning the filters. If the filters are incidentally damaged, fit a genuine
Hoover replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter should be washed
at least once a month.
Changing and Cleaning the Intense Floor Roller
IMPORTANT: Always switch off the cleaner and remove the removable battery pack before changing or cleaning the
agitator.
1. Detach the nozzle from the tube. [14]
2. Position the nozzle with the Intense Floor Roller facing you. Pull the agitator release system lever upwards and
remove Intense Floor Roller. [15a]
3. Remove all debris, fibers and hair from Intense Floor Roller, using scissors. [15b]
4. Re-insert Intense Floor Roller and locate agitator release system back in position. [15c]
Replacing the Batteries
This cleaner is fitted with a rechargeable Lithium ion removable battery pack and it is replaceable. Moreover,the battery
can be charged also out of the product.
WARNING: Only use approved replacement parts for your cleaner. Using parts not validated by Hoover are dangerous
and will invalidate your guarantee.
WARNING: Do not try to open the removable battery pack and repair it by yourself.
1. Press the removable battery pack release button and it can be taken out from main body.
2. Remove the old removable battery pack and replace it with the new one.
3. Dispose of the batteries safely. Used batteries should be taken to a recycling station and not disposed off with
household waste.
* Certain Models Only
5
GB