Ameriphone XL-50 Mode D'emploi page 10

Setting up Your XL-50
There are five initial steps involved
in setting up your XL-50.
1. Insert four AA alkaline batteries
for back-up in case of AC
power outage.
2. Decide if you want the
phone to sit on a desk or
hang on the wall.
3. Connect the telephone
components.
4. Program up to 12 telephone
numbers to call with the
press of a memory button.
5. Set up special features
Installing the Backup Batteries
If there is a power outage, the
XL-50 will operate for up to 48
hours with four AA alkaline
backup batteries (not included). If
the phone is not in use, the batteries
will stay charge for several months.
Figure 3 - Accessing the Batteries
All manuals and user guides at all-guides.com
To install new batteries:
1. Slide open the battery
compartment cover on the
bottom of the telephone
(Figure 3).
2. Install four fresh batteries. Be
sure to observe battery polarity
as imprinted on the base of
the compartment. The battery
indicator on the top panel will
light up if the batteries are
running low.
The phone operates as a regular
phone if there is no power or battery.
XL-50 Low Battery Indicator
If the batteries are weak or not
installed, the Low Battery indicator
will light up. Install fresh batteries
according to the directions above.
Figure 4 - Low Battery Indicator Light
E
N
G
L
I
S
H
4