Télécharger Imprimer la page

Spectro-UV Spectroline OPTIMAX Multi-Lite OFK-300A Manuel De L'opérateur page 3

Publicité

Les langues disponibles

Les langues disponibles

Carrying Case with Foam Inserts,
CC-600
APPLICATIONS
Typical Applications of Forensic Wavelengths
Lamp Head Color/
Spectacles
Dominant Wavelength
Black
UV-absorbing
UV-A 365nm
Blue
Orange
450nm
White
400-700nm
Application
Natural and UV-fluorescent
dyes and powders, document
examination
Bodily fluids (semen,
urine, blood protein), bite
marks, bruising, hair, fibers,
cyanoacrylate
N/A
General field inspection
4
SAFETY AND PRECAUTIONS
Before operating your OPTIMAX Multi-Lite Forensic LED Light Source,
please read these important safety instructions.
UV emitted from this product. Avoid eye and skin exposure to unshielded
FOR PROFESSIONAL EXAMINATION USE ONLY
The OPTIMAX Multi-Lite must be fully charged before first use.
CAUTION: Use only the battery charger packed with the flashlight. Do not
attempt to use the charger to recharge any other product.
Use only the included battery stick (part no. 125608, see Replacement Parts
for listing).
NiMH and Ni-Cd batteries are close cousins. The chemistry is similar. The
difference is NiMH batteries are nontoxic and there is no memory loss from
short cycling.
The OPTIMAX Multi-Lite is not approved for use in hazardous atmospheres.
Do not attempt to use it in areas requiring explosion-proof lighting.
OPERATION
CHARGING AND USE
The OPTIMAX Multi-Lite is available with different chargers. See Replacement
Parts for listing.
Fully charge your OPTIMAX Multi-Lite before first use.
A lamp head must be attached to the lamp in order to charge.
The OPTIMAX Multi-Lite lamp is equipped with a battery strength indicator
light. When the battery is of sufficient strength to power the lamp at its
specified performance, GREEN will be indicated. When the battery requires
recharging, RED will be indicated. The lamp will continue to function.
However, using it when the indicator is RED will shorten the life of the
battery.
Insert the smart charger (AC and DC supplied) into the tail-cap of the
OPTIMAX Multi-Lite and attach the plug to the corresponding live power
source. The flashlight can operate for approximately 90 minutes after a full
charge.
Press the switch on to light and use the OPTIMAX Multi-Lite. Lamp indicator
will be GREEN.
WARNING
products.
5

Publicité

loading