Publicité
Les langues disponibles
Les langues disponibles
US
Read all instructions before using or installing this product.
Technical data
– Maximal load each shelf:
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
- 21511 171351:
- 21512 171351:
Maximal load mirror cabinet total:
- 21511 171351:
- 21512 171351:
– Degree of protection:
– Ambient conditions:
Operating temperature
Storage temperature
– Luminous color
Mounting dimensions, see page 11.
Modes
The device can be operated in two modes.
Mode 1 (ex works):
Lighting On/Off at the device button (Off
automatically after power returns).
Mode 2:
Lighting On/Off at the external light switch (Off
automatically after power returns).
To change mode, see table under Operation:
Installation, see fi gure 1a/1b onwards on page 12.
CAUTION: Risk of personal injury: This
product is very heavy. Get assistance lifting the
cabinet.
Before installation check whether the fastening mate-
rials included are suitable for the anchoring base. The
fastening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
• Check the mounting position, see fi gure 1a/1b.
• Remove the doors, see fi gure 2.
WARNING - GROUNDING
INSTRUCTIONS
This product must be connected to a grounded me-
tal, permanent wiring system, or an equiment-groun-
ding conductor must be run with the circuit con-
ductors and connected to the equipment-grounding
terminal or lead on the product.
max 3.3 lb
120 V AC / 50/60 Hz
15 A / 1800 VA
Width
Weight
Light
27-15/16"
50.0 lb 26.0 W
41-3/4"
73.4 lb 39.0 W
69.89 lb
93.25 lb
NEMA 1
32° – 113° F
-40° – 158° F
4000 Kelvin
Wiring diagram, see fi gure 3 on page 13.
• Connect the mirror cabinet to the power supply,
see fi gure 4a/4b.
• Place the mirror cabinet in the installation opening,
see fi gure 5.
• Fix the mirror cabinet in the installation opening
with the screws, see fi gure 6.
• Place the glass shelf holders in the mirror cabinet,
see fi gure 7.
• Place the glass shelves in the mirror cabinet,
see fi gure 7.
• Observe the maximum load on the glass shelves
(3.3 lb), see fi gure 8.
• Insert the doors, see fi gure 9.
• Adjust the doors of the mirror cabinet, see fi gure 10
–12 on page 15 and 16.
Operation
Button functions
Button
Function
Light on/off
• Pressing the button switches the mirror cab-
inet on with the selected settings. The white
LED goes off.
• Pressing the button again switches the mirror
cabinet off. The white LED lights up.
To change mode
• Switch off the refl ector.
• Press the button and hold it down for
15 seconds.
- The light comes on again if the mode has
been changed.
Repeat the procedure described to re-enable
mode 1a/1b.
• The white LED can be deactivated.
– Switch on the mirror cabinet.
– Press and hold the button for 15 seconds.
- The lighting gets lighter or darker.
- The lighting switches off briefl y and the
white LED is deactivated.
To switch the white LED back on, repeat the
described procedure.
3
Publicité
