The appliance should be stored in a room where there
is no continuously operating source of ignition (e.g.
open flames, an operating gas appliance or an
operating electric heater). Do not pierce or burn.
Please note : some refrigerants are odorless.
The appliance must be installed, operated and stored in
a room with sufficient floor space for the amount of
refrigerant charged in the system. For specific
information on gas type and volume, please refer to the
nameplate located on the unit.
The device must be installed, used and stored in a room
with a floor space greater than 4 m2. All national gas
regulations must be observed.
Make sure that the ventilation openings are never
blocked.
The device must be stored in such a way as to prevent
mechanical damage.
The device should be stored in a well-ventilated area
and the room size should match the room area
specified for operation.
Any person working on or opening the cooling system
must hold a current certificate issued by an approved
assessment authority, attesting to their ability to handle
refrigerants safely in accordance with a recognized
assessment specification. Repair operations must not
be carried out only as recommended by the equipment
manufacturer. Maintenance and repair operations which
require the intervention of other qualified persons must
23