Publicité
Les langues disponibles
Les langues disponibles
Your air conditioner is designed to be installed
widths of 23 1 4 to 36 inches (590mm to 914mm) (See Fig.1).
/
EXTERIOR
OFFSET
WALL
STOOL
SILL
INTERIOR
WALL
Mounting Hardware
3/4"Screws
Lock Frame
(7)
(2)
Top Rail Hardware
3/8"Screws
(4)
Top Rail
Fig.B
INSTALLATION INSTRUCTIONS
Lower sash must open sufficiently to allow a clear vertical
opening of 13 inches (330mm). Side louvers and the rear
23 1 4 to 36
/
590mm to 914mm
of the AC must have clear air space to allow enough airflow
through the condenser, for heat removal. The rear of the unit
13 min.
(330 mm)
must be outdoors, not inside a building or garage.
NOTE: Save Carton and these Installation Instructions
for future reference. The carton is the best way to store unit
Fig.1
during winter, or when not in use.
TOOLS NEEDED:
Phillips
Drill (If pilot holes are needed)
CAUTION: When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and rear coils.
Sash Lock
(1)
Before installing unit, the top rail must be assembled
on the unit.
Tool Needed: Phillips Screwdriver
Top Rail
(1)
A: Remove the air conditioner from the carton and place
Packaging
B: Remove top rail from the side of the packaging material
Fig.A
Fig.C
in standard double hung windows with opening
on a flat surface.
as shown in Fig.A
C: Align the hole in the top rail with those in the
top of the unit as shown in Fig.B
D: Secure the top rail to the unit with 3/8
screws as shown in Fig.C.
NOTE: For safety reasons, all four(4) screws
MUST be securely fastened.
7
,,
Publicité
