Manuels Connexes pour Rockford Fosgate POWER T142
Sommaire des Matières pour Rockford Fosgate POWER T142
- Page 1 FULL RANGE SPEAKERS T142 T152 T165 T1675 T1572 T1462 T1682 T1692 T1693 Serial Number: Date of Purchase: Installation & Operation...
- Page 2 fire and/or possible injury. ©2011 Rockford Corporation. All Rights Reversed. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.
- Page 3 6”x8” 6”x9” 6”x9” 6”x9” 6”x9” See pages 4-7 for additional dimensions. CEA 2006 Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier’s output power ratings are REAL POWER numbers, not inflated marketing ratings.
- Page 4 illus.-1.1...
- Page 5 illus.-1.2...
- Page 6 illus.-1.3...
- Page 7 illus.-1.4...
- Page 8 Contents 5. On models with slotted holes, fit the speaker into the cutout and install the screws in the slots at the top and bottom.This will allow (1) Pair Power Series Full Range Speakers you to rotate the speaker to match the remaining mounting holes. When aligned, tighten the screws.
- Page 9 illus.-3.1...
- Page 10 illus.-3.2...
- Page 11 illus.-3.3...
- Page 12 Considérations Concernant L’installation 7. Serrez les vis jusqu’à ce que le haut-parleur soit bien ajusté, de façon à prévenir tout cliquetis, mais évitez tout serrage excessif.REMARQUE: Avant de commencer l’installation, suivez les règles ci-dessous: Nous recommandons l’utilisation d’un fil de 4AWG pour les prises d’alimentation (B+) et de masse (GND).
- Page 13 Consideraciones para la instalación acabado arriba del altavoz y móntelo en su sitio usando cuatro (4) tornillos. Antes de comenzar cualquier instalación, siga estas simples normas: 7. Apriete los tornillos hasta que el altavoz esté ajustado en su sitio para 1.
- Page 14 Einbauüberlegungen 6. An Modellen mit einem Zierring den Zierring über den Lautsprecher legen und mit 4 (vier) Schrauben an seinem Platz befestigen. Befolgen Sie vor dem Einbau diese einfachen Regeln: 7. Die Schrauben anziehen, bis der Lautsprecher eng an seinem Platz 1.
- Page 15 Considerazioni sull’installazione 7. Per evitare rumore dovuto a vibrazioni serrare le viti finché il diffusore non sia saldamente in posizione. Non serrare le viti in modo eccessivo. Prima di iniziare qualsiasi operazione d’installazione, vi consigliamo di NOTA: Nel caso dei T142, T1462, T152, T16, T165 e T1675 solamente, seguire queste semplici regole: montare il diffusore servendosi, se necessario, della piastra di adattamen- to in dotazione.
- Page 16 What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distribu- tor and not by Rockford Corporation.
- Page 17 Installation assistance availible at: www.rockfordfosgate.com/rftech R O C K F O R D F O S G A T E . C O M...
- Page 18 SPEAKER CUTOUT TEMPLATES T152-S T16-S T165-S T1675-S T1T-S T142 T152 T165 T1675 T1572 T1462 T1682 T1692 T1693 Installation & Operation...
- Page 19 ©2012 Rockford Corporation. All Rights Reversed. ROCKFORD FOSGATE and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice. For use in vehicles only.
- Page 20 Installation Cutout Templates Use the included illustrations to achieve an accurate fitment. 1. Print on 8-1/2” x 11” Paper - Scale to 100% NOTE: The included illustrations are accurate to ± 0.0625” Mounting Holes 3.20" (81.3mm) T142 Hole Cutout 4.04" (102.5mm) Verify Scale Before Using...
- Page 21 Installation T1T-S & T152-S Tweeter Cutout 1.75" (44.0mm) Mounting Holes 3.84" (97.6mm) T152/T152-S Hole Cutout 4.81" (122.2mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.2...
- Page 22 Installation T1T-S, T16-S & T165-S Tweeter Cutout 1.75" (44.0mm) Mounting Holes 4.31" (109.6mm) T16/T16-S & T165/T165-S Hole Cutout 5.05" (128.2mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.3...
- Page 23 Installation T1T-S & T1675-S Tweeter Cutout 1.75" (44.0mm) Mounting Holes 4.37" (111.0mm) T1675/T1675-S Hole Cutout 5.68" (144.2mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.4...
- Page 24 Installation Mounting Holes 3.15" (80.0mm) T1462 Hole Cutout 3.76" x 6.01" (95.6mm x 152.6mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.5...
- Page 25 Installation Mounting Holes 5.02" (127.6mm) T1572 Hole Cutout 4.76" x 7.02" (120.9mm x 178.4mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.6...
- Page 26 Installation Mounting Holes 5.04" (127.9mm) T1682 Hole Cutout 5.08" x 7.26" (129.0mm x 184.3mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.7...
- Page 27 Installation Mounting Holes 4.78" (121.5mm) T1692/T1693 Hole Cutout 5.77" x 8.51" (146.5mm x 216.2mm) Verify Scale Before Using 1.00" (25.40mm) Template 1.00" (25.40mm) illus.-1.8...
- Page 28 Installation...
- Page 29 Installation assistance availible at: www.rockfordfosgate.com/rftech 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 R O C K F O R D F O S G A T E . C O M...