Publicité
Les langues disponibles
Les langues disponibles
S2 / S3 • Operating Manual
Safety instructions and marked parts
Ensure the assembly area is stable to prevent the product from toppling over. Possibility of
physical injury.
Do not move the product by tugging on the hose.
The toggle fastener poses a risk of pinching.
Original replacement parts must be used for the dust extractor S2/S3.
Before performing maintenance on the dust extractor, all connected products must be turned
off and disconnected.
Dust can be hazardous to one's health and may be dispersed when cleaning the product. Use
protective eyewear, gloves, and a respiration mask class FFP3.
Do not puncture the Longopac bag. Potential for dust dispersal.
Damaged power cables can be dangerous and should be replaced immediately.
Improper connection of the grounding conductor and any modification of the provided power
plug can result in a risk of electrical shock. Advise and carry out installation by a qualified
electrician.
Before using the dust extractor, make sure that the power & voltage corresponds with the
machine's rating plate.
Do not use outdoors or on wet surface, this machine is for indoor and dry use only.
Do not put any object into or block the air inlet (besides during filter cleaning procedure).
Keep hair, loose clothing, fingers and all body parts away from the suction inlet.
Do not use without a collection bag and filters in place. Replace if damaged or clogged.
Safety stickers on the machine
Use protective equipment!
Damaged or lost safety stickers must be replaced immediately. These stickers are obtainable
from your Customer Service Center.
5
Publicité
