Publicité
Les langues disponibles
Les langues disponibles
AHP Hydraulic Pump in Combination with a Roll Cart
All ALFRA AHP Hydraulic Pumps can be used together with a roll cart (prod.-no.03860). Its stable rubber wheels
allow the user to easily transport the pump around the construction site or in the workshop.
Attach the pump as illustrated below by means of four M6 screws (included in the roll cart delivery) to the transport
cart to prevent the pump from slipping or falling off.
Apply the brakes of the roll cart to prevent inadvertent rolling!
Positioning the Pump during Operation
The tank of the AHP pump is closed by the ventilation screw and thus is not sealed. To prevent the hydraulic oil
inside the tank from leaking or overflowing, the pump must not be used at a sharp slope.
When the pump is used frequently, foam can occur on the oil surface which, when the pump is used in a highly
sloped position, can flow out of the ventilation screw into the oil tank vent. It is preferable to align the pump
horizontally.
17
Publicité
