Télécharger Imprimer la page

Viesta DH600-XA Manuel D'utilisation page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation of the appliance when
air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity are simultaneously in
operation, the negative pressure in the room must not exceed 4 Pa (4×10-5 Bar)
Before attaching the bracket to the chimney, decide the location of the lower chimney bracket fixing holes for
fixing the lower chimney bracket in the later step.
1. After confirm the installation height of the hood, and then, fix the installation hole for the hood, inside
chimney bracket and safety hole as per the hood size. Make the holes on the wall.
2. Install the expansion pipe onto the cooker hood and tie it with cable tie
3. Install the chimney bracket on the chimney.
expansion pipe
Inside chimney
Outside chimney bracket
2 x screw
(4mm x 8mm)
Outside chimney
[ EN ● 6 ]
KEN002DH 04.02.2019
8 x wall plug
2 x screw
(4mm x 30mm)
cable tie
Version: 3.0

Publicité

loading

Produits Connexes pour Viesta DH600-XA

Ce manuel est également adapté pour:

Dh600-xcDh600-xdDh600-xeDh900-xe