Viesta DH600-XA Manuel D'utilisation page 5

Mounting of the V-FLAP:
If the cooker hood does not have an assembled V-flap 1, you should mount the half-parts to its body.
The images only show an example of how to mount the V-flap,the outlet may be various according to
different models and configuration.
To mount the V-flap 1 you should:
• Mount two half-parts 2 into the body 6
• a pin 3 should be top oriented;
• the axis 4 should be inserted in the holes 5 on body;
• repeat all the operations for the 2nd half-part
Prepare for installation:
1. If you have an outlet to the outside, your cooker
hood can be connected as shown below, by means
of an extraction duct (enamel, aluminium, flexible
pipe or not inflammable material with an interior
diameter of 150mm).
2. Before installation, turn the unit off and unplug it
from the outlet.
3. The cooker hood must be placed at a distance of
65~75cm ( 25.6 - 29.5 inch ) above the cooking
plane for best effect.
WALL MOUNTING INSTALLATION
[ EN ● 5 ]
Version: 3.0
KEN002DH 04.02.2019