Publicité
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Do not use the device for grinding solid products such as coffee beans or ice cubes
Switch off the appliance before changing the accessories.
Be careful when using sharp blades.
Avoid any contact with sharp parts of the device while moving.
Incorrectly assembled device may cause fire, electric shock or other injury.
Maximum allowable continuous operating time is 30 sec. Turn off the device and allow the engine cool down for 1 min before continuing. After 4 rounds allow the engine cool down for 15
min before continuing.
BEFORE THE FIRST USE
Unpack the appliance and remove all packaging materials and labels.
Clean the motor block with a damp cloth, clean the accessories in soapy water rinse thoroughly and dry.
Set proper accessory.
USING THE DEVICE
I.
USING BLENDER
Set blender accessory
Place the accessory in the cup with the product, hold the handle
Connect the device to the mains, press on/off button.
Move blender in the cup in a circular motion for proper grinding
Don‟t allow any liquid reaching device handle
In case cutting blades are blocked, unplug the appliance from the mains
After use, remove blender from the mains and disconnect the accessory
II. USING WHISK
Fix handle on the upper part of the whisk
Place product inside of the cup
Turn device on.
After use plug device out from the mains and disconnect the whisk
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance.
Use wet cloth to clean the motor block. Do not immerse the appliance in water or other liquids.
Clean accessories in soapy water and dry.
Do not use chemical and abrasive cleaners for cleaning.
Recommended to clean the device right after operating to avoid coloring of plastic parts.
6
Publicité
