Concept VS5100 Mode D'emploi page 35

EN
PRODUCT DESCRIPTION
1. Appliance body
2. Rear support base
3. Front support base
4. Plastic nut
5. Power cord
Note: All pictures used in this manual are for illustration
only. In case of any differences between the images used
and the actual product, it is necessary to follow the actual
product.
INSTLLATION INSTRUCTIONS
1. Remove the fan body and individual parts from the packaging. Connect the front and rear support base (see Fig. 1).
2. Unscrew the plastic nut from the fan body.
3. Feed the power cord through opening of the fan body in the support base (see Fig. 3).
4. Attach the fan body to the support base using the plastic nut (see Fig. 2).
Fig. 1
Fig. 2 Fig. 3
0 VS5100/VS5110
35