Publicité
PSD-T BSWD
ON/OFF
ON*OFF
I mains (A)
I max
max / 2
I nom.
Time (us)
Tref
The plug must be plugged into an outlet that is installed
and grounded in accordance with all appropriate codes
and ordinances. No adaptor should be used with
this appliance
PSD-T ACL
ON/OFF
Electrical Characteristics
Imax (A)
10
Tref (µs)
35,9
MCB
No. of luminaires (max)
B-10A
11
B-16A
18
C-10A
19
C-16A
31
4.5
ON
OFF
Dimming
- The luminaire shall be installed by qualified electrician and wired in
accordance with the latest IEE electrical egulations or the national
requirements.
- The light source contained in this luminaire is non user replacable, it shall
only be replaced by the manufactureror his service agent or a
similar qualified person
- During the installation or maintaining the luminaire please use gloves to
avoid spots on the cover.
To remove dirt and spots use the following:
- Dust: use micro fiber cloths only.
- Fingerprints, etc.: use cleaner for synthetic materials
with antistatic properties.
- Luminaires not suitable for covering with thermally insulating material.
- For controllable luminaires, the classification of the insulation between LV
supply and control conductors shall be basic insulation at least.
- Luminaires must not be used or stored in corrosive environment
where hazardous materials such as Sulphur,Chlorine,
Phthalates, etc., are present.
3/8
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Publicité
