Bresser LED STRIPE Mode D'emploi page 12

Technical data
Light source 1
Light source 2
Brightness levels
Battery operation
Light colour
Brightness
Operating time
Material
Dimensions
Weight
Notes on cleaning
• Before cleaning the device, disconnect it from the power supply!
• Only use a dry cloth to clean the exterior of the device. To avoid
damaging the electronics, do not use any cleaning fluid.
12
LED Stripe (flex COB)
LED Spot
100% / 40% / flashes
1x 1200 mAh Li-Po battery
white
LED Stripe: 300 lm
LED Spot: 90 lm
LED Stripe: 2.5h
LED Spot: 4h
ABS + Silicone + EVA
34x3.2x1.6 cm (LxWxH)
69 g
EC Declaration of Conformity
Bresser GmbH has issued a "Declaration of Conformity"
in accordance with applicable guidelines and corre-
sponding standards. The full text of the EU declaration of
conformity is available at the following internet address:
www.bresser.de/download/9682600/CE/9682600_CE.pdf
UKCA Declaration of Conformity
Bresser GmbH has issued a „Declaration of
Conformity" in accordance with applicable guidelines
and corresponding standards. The full text of the
UKCA declaration of conformity is available at the
following internet address:
www.bresser.de/download/9682600/UKCA/9682600_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge,
Kent TN8 6HF, Great Britain
Disposal
Dispose of the packaging materials properly, according to
their type, such as paper or cardboard. Contact your local
waste-disposal service or environmental authority for infor-
mation on the proper disposal.