Rowenta ERGO FORCE CYCLONIC RO67 Serie Mode D'emploi page 13

EN
DESCRIPTION
1 Lid
2 Lid release button
3 Transport handle
4 Bumper
5 Power cord rewind pedal
6 ON/OFF pedal
7 Parking position
8 Wheels
9 Multi-directional wheel
10 Suction inlet
11 Dust compartment
12 Maximum fill level for dust compartment
Accessories
Your appliance will come equipped with a series of ERGO COMFORT accessories either with or without a tube/nozzle
locking system.
I. Chain of ERGO COMFORT accessories without
tube/nozzle locking system*
I.18 Flexible hose with power nozzle ERGO COMFORT
a - ERGO COMFORT ergonomic nozzle
b - Manual power switch (POWERCONTROL)
c - Integrated furniture brush (EASY BRUSH)
I.19 Telescopic metal tube ERGO COMFORT*
a - Nozzle/tube locking system (LOCK SYSTEM)
b - Tube adjustment button (TELESCOPIC
SYSTEM)
I.20 Nozzle for all floor types, 2 positions*
a - 2 position button: brush retracted for rugs and
carpets - brushed extended for parquets and
smooth floors.
I.21 Parquet nozzle*
I.22 Mini turbo-brush*
I.23 Maxi turbo-brush*
I.24 Telescopic crevice nozzle*
I.25 Upholstery nozzle*
I.26 Accessory holder*
I.27 Smooth floors nozzle with removable brush*
a - use on smooth floors with crevices
b - use on fragile smooth floors
USING FOR THE FIRST TIME
1 • Unpacking
Unpack your appliance and remove any labels, keep your
guarantee form and read the instructions carefully before
using your appliance for the first time.
Your vacuum cleaner is an electrical appliance: it should be
used in normal operating conditions.
Check that your vacuum cleaner voltage corresponds to that
of your domestic power supply. Switch off and disconnect
the appliance by unplugging without pulling the cord:
immediately after use, before changing accessories, before
cleaning, maintenance or changing the filter.
Important: the mains plug should be protected with a 16 A
fuse at least. If the circuit breaker is triggered while the
*According to model: these parts are specific to certain models
or they are accessories that can be purchased separately.
All manuals and user guides at all-guides.com
13
14
15
16
17
II. Chain of ERGO COMFORT accessories with
tube/nozzle locking system*
II.18
II.19
II.20
II.21 a
II.22
II.23
II.24
II.25
II.26
II.27
appliance is in operation, this may be due to the fact that
other appliances with high connected power are connected
at the same time to the same electrical circuit. This can be
avoided by setting the appliance to a low power before
turning on and then adjusting to a higher power.
2 • Recommendations and
precautions
Unwind the power cord completely before each use. Do not
jam it and do not allow it to rub against sharp edges.
If you are using an electrical extension, check that it works
properly and that it is suited to the power of your vacuum
cleaner. Do not unplug the appliance by pulling on the
8
Dust compartment housing
Air/dust separation system
a - Separator with air/dust divider
b - Separation compartment
Air outlet grill
Air outlet filters :
a - Microfilter (ref. RS-RT4041)
b - Filtration foam (ref. RS-RT4042)
HEPA filter cassette (ref. ZR9026.01):
a - HEPA filter
b - Washable filter
Flexible hose with power nozzle ERGO COMFORT
a - ERGO COMFORT ergonomic nozzle
b - Manual power switch (POWERCONTROL)
c - Integrated furniture brush (EASY BRUSH)
Telescopic metal tube ERGO COMFORT*
a - Nozzle/tube locking system (LOCK SYSTEM)
b - Tube adjustment button (TELESCOPIC
SYSTEM)
Nozzle for all floor types, 2 positions*
a - 2 position button: brush retracted for rugs and
carpets - brushed extended for parquets and
smooth floors.
b - Nozzle/tube locking system (LOCK SYSTEM)
- Parquet nozzle*
b - Delta parquet nozzle*
Mini turbo-brush*
Maxi turbo-brush*
Telescopic crevice nozzle*
Upholstery nozzle*
Accessory holder*
Smooth floors nozzle with removable brush*
a - use on smooth floors with crevices
b - use on fragile smooth floors