JAPANNEXT JN-IPS315UHDR Manuel De L'utilisateur page 6

Attention :
* Please note that the panel should be handled with care. Please be careful not to push down on
the LCD surface with your fingers or any other object from above, as there is a risk of damaging
the panel
* When installing, please be sure to handle the screws carefully to avoid dropping them.
1. Place a soft cloth on a flat and stable surface, and place the monitor screen on top with
the screen facing up.
2. Insert the stand attachment part of the monitor's back into the hook of the top of the stand.
3. Attach the legs to the stand pole using the included screws.
4. After confirming that the monitor and stand are securely fixed, slowly raise the monitor.
* This product supports tilt adjustment. When using the screen tilted forward, please
be careful not to let the main unit fall over.
1. Make sure that the power of the monitor and computer is turned OFF before connecting
the cable.
2. Attach the cable (HDMI, DP) that is compatible with the monitor to the monitor.
Connect the cables (HDMI, DP) to the computer as well.
3. Turn ON the power of the monitor and computer.
Warning: To work safely, always connect the ground wire before plugging in the power plug.
(Only if there is a ground link). Also, when disconnecting the ground connection, always unplug the power plug
from the outlet first.
Note: HDMI, DP cables should not be connected simultaneously, as this may cause malfunctions.Please
connect only one cable to one computer.
6
QUICK START GUIDE
Installation
Connecting to a Computer