Tyrolit DME17DP Manuel page 17

8. D E C L A R A T I O N O F C O N F O R M I T Y
Description:
Type:
from serial no.:
We hereby declare under our sole responsibility that this product conforms with the following
standards: EN60745-1, EN60745-2-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3 in
accordance to the regulations of directive 2006/42/EG, 2011/65/EU and 2014/30/EU.
TYROLIT Hydrostress AG
Witzbergstraße 18
CH 8330 Pfäffikon
9. R E C Y C L I N G
According to the European regulation 2002/96/EG we have to take back old machines for
departing them by substance and for recycling. Please make sure that the old tool does
not get into the unsorted municipal solid waste, but that it is given back to us, resp. abroad
to our distributors.
Diamond core drill - for drilling holes in concrete, stone and masonry
DME17DP (and versions)
0619001
Pfäffikon, 16.03.2020
Roland Kägi, Operations + R & D Machines
Original instructions - Subject to change without notice 0619
14