- Switching on -
Note : Charge your Thomson device before using it for the first time.
Charging the battery of your device
Connect the adapter to an earthed electrical outlet.
WARNING :
Read carefully the following instructions concerning the battery of your THOMSON
device:
• Only a technician authorized by Thomson is authorized to remove and handle the
battery.
• The battery in your Thomson device may present a fire or burn hazard if it is removed
or disassembled.
• Comply with the information on the device' s warning labels to avoid any risk of injury.
• There is a risk of explosion if the battery is replaced by an incorrect model.
• Do not dispose of the battery in a fire.
• Do not attempt to short-circuit the battery of the Thomson camera.
• Do not attempt to disassemble the battery or reassemble the battery.
• Stop using the battery if it leaks.
• The battery and its components must be recycled or disposed of properly.
• Keep the battery and its components out of reach of children.
Turning your device on / off
Turn on your device by pressing and holding the power button for a
long time.
To turn off your device, go to the Start menu and select Start/Stop > Stop.
34 - EN
User's Manual - Neo Z3 - Z313Q850
First start of your device
During the first boot, the Windows® 10 operating system will guide you
through the configuration steps.
Once these configuration steps are completed, the system completes the
installation and applies your customized settings. Do not turn off the unit and
ensure that there is sufficient battery power during this step.
The Windows® 10 home screen appears after installation and configuration
is complete.
Note : If you want to restore the factory configuration or reinstall your operating system,
we recommend using the Windows Reset function. For this reason,
1. Open the start menu and choose «Settings».
2. Select «Update and Update and Security» then «Recovery» from the Right menu.
3. Click on the «Start» button in the «Reset this PC» section.
4. Let us guide you.
mythomson.com
EN - 35