MAC Audio BT ELITE 4000 Mode D'emploi page 17

PAIR AND CONNECT
Enable Bluetooth on your smartphone or other
device.
Make sure the LED indicator is blinking blue. (If it
isn't, switch the speaker off and on again.)
Choose BT ELITE 4000 from the pairing options
on your smartphone. (If it's not in the list, choose
"Scan" from your phone's Bluetooth menu.)
The speaker gives an audio signal when
it's finished pairing and connecting to your
smartphone. The LED indicator on the rear of the
speaker is blue.
Note: The process of enabling Bluetooth and connecting
varies from device to device. See your device's owners
manual for more information and specific instructions.
Press and hold the
seconds to disable Bluetooth pairing.
Bluetooth Wireless Connection Tips
• Make sure the Bluetooth capability of your device is
turned on.
• Make sure there's nothing plugged into the speaker's
AUX IN jack when you're trying to use Bluetooth.
• The Bluetooth wireless connection works up to a
range of roughly 33 feet (10 meters). This range may
vary, however, based on other factors, such as room
layout, wall material, obstacles, your device's Bluetooth
performance, etc. If you're having problems connecting
to this speaker, move closer to it.
• If your device asks you for a password to connect, use
"0000".
button for approx. 6
17