Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1.
Remove smaller top logs and set aside carefully.
2.
If using wax log, place wax log on grate between larger bot-
tom logs (see Figure 7). Follow manufacturer's instructions.
Note: Combustion air is needed for the fire log to burn prop-
erly. The rear log grate step can be adjusted to create more
space between the front and back log allowing more air around
the fire log.
3.
If using gelled-alcohol fuel, place 1 to 3 canisters on grate
between larger bottom logs (see Figure 8). Follow
manufacturer's instructions.
4.
Replace top logs roughly perpendicular to, and toward outside
of bottom logs (see Figure 5).
Note: When burning gelled-alcohol fuel, ensure the cross-over
logs do not come in contact with flames. This will cause soot.
Follow manufacturer's instructions.
5.
Ignite paper on wax log and allow to burn completely.
IMPORTANT: Damper must be fully open.
Figure 7 - Installing Wax Log (Follow Manufacturer's Instructions)
Figure 8 - Installing Gelled-Alcohol Fuel (Follow Manufacturer's
Instructions)
For more information, visit www.desatech.com
For more information, visit www.desatech.com
108649
CLEANING AND MAINTENANCE
ILLUSTRATED PARTS BREAKDOWN
CLEANING AND MAINTENANCE
• Keep the area around the log set clean and clear of debris.
• Occasionally, you may use a soft bristle brush to clean logs.
• Once every year a qualified agency or certified chimney sweep
should examine and clean the venting system of the fireplace.
• Empty ash pan after each use. Let product cool completely
before emptying ash pan.
ILLUSTRATED PARTS
BREAKDOWN
4
3
KEY
PART
NO.
NUMBER
1
108699-01
2
901630-01
3
108650-01
4
901713-01
5
901111-01
6
901102-01
7
901476-01
OPERATION
7
5
6
2
DESCRIPTION
QTY.
Grate
1
Grate Steps
2
Ash Pan
1
Front Log
1
Back Log
1
Top Log 1
1
Top Log 2
1
3 3
1
Publicité
Table des Matières
