Buffalo DB177 Mode D'emploi page 5

Cleaning, Care & Maintenance
• Always turn OFF the appliance and disconnect from the power supply before cleaning.
• Allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
Crumb Tray
• Periodically remove the crumb tray and empty.
Warning: Do not remove the tray during or immediately after use as it will be
hot.
• Clean the crumb tray using warm, soapy water.
Troubleshooting
Fault
Appliance not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Appliance does Faulty thermostat
not reach set
Faulty element
temperature
Appliance heats up Indicator light has expired
but indicator light
does not come on
Power indicator Faulty element
light comes on but
Faulty thermostat
appliance does not
heat up Thermostat set incorrectly
Appliance slow to Faulty element
heat up
Technical Specifications
Model Voltage
DB177
230V, 50Hz
DB177_ML_A5_v2 20200515.indb 5 DB177_ML_A5_v2 20200515.indb 5
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Call BUFFALO agent or qualified technician
Power Current
2800W 12.2A
Solution
Dimensions
Weight
H x W x D mm
302 x 386 x 643 13kg
UK
5
2020/5/15 11:34 2020/5/15 11:34