MAINTENANCE
! Before cleaning or maintenance cut the power.
Cleaning the hood
WHEN TO CLEAN IT: clean it at least every 2 months to
prevent the risk of fire.
EXTERNAL CLEANING: use a cloth moistened in
lukewarm water and neutral detergent (for painted hoods);
use specific products for steel, copper or brass hoods.
INTERNAL CLEANING: use a cloth (or brush) soaked in
denatured ethyl alcohol.
WHAT NOT TO DO: do not use abrasive or corrosive
products (e.g. metal sponges, brushes, too hard brushes,
very aggressive detergents, etc.)
Cleaning the grease filters
WHEN TO CLEAN IT: clean it at least every 2 months to
prevent the risk of fire, in according to use.
HOW TO REMOVE THE FILTERS: push the catch near the
handle towards the rear of the hood and pull the filter
downwards
HOW TO CLEAN THE FILTERS: hand wash or in the
dishwasher using a neutral detergent. If washing in the
dishwasher, possible discoloration of the filters does not
in any way compromise their functioning.
Cleaning the front board
Clean the surface of the "blackboard" using water and a
neutral detergent. Do not usesolventsorabrasive products.
Clean the surface before writing with chalk as well.
Replacing the charcoal filters (P)
(for filtering version only)
WHEN TO REPLACE IT: replace it at least every 6 months,
in according to use.
HOW TO REMOVE IT: remove the charcoal filters with rotary
motion.
Lighting
Replace it with lamps of the same type; if a lamp is not
listed in the table shown in the "Warning" worksheet,
please contact the support center.
Components not provided with the product