Publicité
Les langues disponibles
Les langues disponibles
CONTROLS
Appliance controls
The control panel is shown in figure 10. For reference it is also shown
below:
1. When the appliance is turned on for the first time, the freezer com-
partment will operate at –18°C. If you need to change temperature
or function, press and hold
panel. The control panel will lock again after 30 seconds of inactiv-
ity. You can control freezer compartment temperature in the range
–15°C to –24°C.
2. When the control panel is unlocked, press the
desired temperature. When rapid cooling function is selected, the
indicator on the display panel is on). The freezer compartment will
maintain a constant temperature of –24°C for a duration of 24 hours,
and after this period, the rapid cooling function will deactivate, and
the temperature will revert to the user's chosen setting.
3. On/Off switch: Press and hold
on/off.
4. To select temperature unit (Celsius/Fahrenheit) press
immediately press
highlighted on the display: Celsius °C or Fahrenheit °F.
5. Activate/deactivate the Sabbath mode. Press the
immediately press
6. This appliance is equipped with a door-open alarm function that ac-
tivates when the door has been open for a duration of 2 minutes,
triggering an alarm sound. The alarm will sound every minute while
the door remains open. Press any button to mute the alarm.
Error display: Error codes may be shown on the display: F4, F5, CE. If
error codes appear on the display, kindly get in touch with our after-sales
department for assistance.
The appliance is equipped with a high temperature alarm feature. If,
following a single refrigeration cycle, the temperature within the freezer
compartment rises above –1°C, an alarm will be activated, and the digits
on the display will start flashing. Press any button to mute the alarm.
The flashing on the display will stop once the temperature falls below
–1°C.
for 3 seconds to unlock the control
for 3 seconds to turn the appliance
twice. The selected temperature unit will be
twice.
- 19 -
button to set the
once then
button once then
Publicité
