ring Stick Up Cam Guide De Configuration page 6

Install the security screws (optional).
Your Stick Up Cam comes with two
optional security screw locations.
One secures the battery compartment,
and the other secures the mounting
bracket to the base. To use them, open
the battery compartment and/or remove
the mounting bracket, then pop out the
rubber plug(s).
10
Swivel the base so the long side
1
faces the front.
Insert and drive the security screw
2
into the base screw location
with a standard Phillips-head
screwdriver (not included).
Turn your Stick Up Cam over to
3
access the battery compartment
screw hole, and drive the second
security screw.
11