ring Stick Up Cam Guide De Configuration page 4

Installing outdoors.
Remove the indoor plug faceplate by
pressing the "PUSH" button and sliding
it off of the adapter. Then grab the
included outdoor power cable, and
slide its connector onto the power
adapter until it clicks into place.
If you plan to install Stick Up Cam outdoors,
secure the power adapter to a wall or floor
with the included screws.
6
Set up your Stick Up Cam
in the Ring app.
In the Ring app, select Set Up a Device.
When prompted, select Security Cams
and follow the in-app instructions.
Try it out!
After setup, tap the Live View button in
the Ring app to see live video from your
Stick Up Cam.
Blue light flashing?
If the light on the front of your Stick Up
Cam is flashing after setup, it's updating
its software. Do not unplug your Stick Up
Cam while the light is flashing!
Choose a location.
Stick Up Cam is happy just about anywhere,
indoors or out. It comes ready to sit on a
flat surface like a table or shelf, but can also
be mounted to a wall. Choose a spot where
it can provide the view you want.
7