RealFlame Baltic T9650LP Manuel Du Propriétaire page 18

GAS COMPONENT CONNECTION CHECKS
3. Make sure that the igniter pin and thermocouple are correctly positioned.
- The igniter pin should be pointed straight to the thermocouple.
- The thermocouple should be positioned 5mm away from the burner tube.
Thermocouple
Wire
4. Make sure that the thermocouple wire is correctly positioned. The thermocouple
wire should be in line with the valve.
18
Thermocouple
Igniter Box
5mm
Valve
Igniter Pin
Thermocouple Wire
Valve
Wire should
be in line
with valve