Genie LA 600 A3 Mode D'emploi page 9

Technical data
Mains voltage (V)
Consumption
Laminating width
Size of the machine (mm)
Film of utilizable thickness
Heating up time
Speed
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following advice
whenever this machine does not function faultlessly, contrary to expectations.
The guarantee period amounts to 24 months from the date of purchase, provided that the
machine has been used appropriately. Please keep the proof-of-purchase voucher and
original packaging in a safe place. The warranty is only valid for defects in materials or
fabrication. However, it is invalid for damage that has occurred to breakable parts, e.g., on
the casing. Machines that have been damaged by inappropriate use externally, are excluded
from being exchanged. A guarantee will expire whenever any repairs have been carried out
without the express consent of our customer service department.
Repairs under the guarantee can only be made when the proof-of-purchase voucher is
enclosed with the defective machine – please notify us about the return by telephone!
Please give your name, address, post code, town and telephone number with the dialing
code. Please state the reason for your complaint too.
We regret any inconvenience caused!
Our service hot line
Tel. +49 (0) 6122-7279891 ● Fax +49 (0) 6122-705952 ●
E-mail: hotline@genie-online.de
Address: GENIE GmbH & Co. KG, -Service- , Berta-Cramer-Ring 22,
D-65205 Wiesbaden. Deutschland/Gemany
Guideline 2012/19/EU concerning the handling, collection, recycling and disposal
of electrical and electronic equipment and their components ('waste electrical and
electronic equipment', known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is not
allowed to be disposed of but it must be handed over to a suitably equipped collection centre
for proper recycling or disposal.
We declare that this device has been manufactured in accordance with the
applicable rules and regulations.
LA 600 A3
220-240 V, 50 Hz
1000 W
320 mm
ca. 495 x 167 x 87 mm
80 - 250 micron
Approx. 1.5 – 2.5 Min
350 mm/min aprox
9