Newlux Infinity Power V4500 Petfriend Manuel D'utilisation page 21

ASSEMBLY
Before assembling or removing accessories, unplug the device.
1.
into the motor unit (1) at the
bottom of the appliance. Press
until it clicks into position.
2. Connect the handle (9) to the
end of to the telescopic tube
(10). Press the button on the
telescopic tube and hold it
down to extend or reduce the
tube to the desired length.
3. Adjust the telescopic tube(10)
shown in the image. Press the
adjust the nozzle according
to the use required. For use
on hard surfaces, press the
foot button on the combi
nozzle to extend the brushes.
Lift the button to use it on soft
surfaces. After use, unplug
the power cord from the
tube from the air intake duct.
21 |