OSCAL HiBuds 5 Guide De Démarrage Rapide page 3

There is a connection prompt tone after successful
connection.
Method 2: 1. When the earbuds are already connected to
the device, Click the "Touch" button four times. The indicator
will blink in red and blue alternately, and the earbuds will
enter the pairing state(Cannot operate while making calls or
playing music ).
2. Turn the Bluetooth on, and select "HiBuds 5". There is a
connection prompt tone after successful connection.
Note: The above is the connection method when the
product is pairing a new device for the f irst time. After the
initial use of the product, the earbuds will automatically
switch on and connect to the device when you take it out
from the charging case.
CONTROL
i) Equipment operation
1. Power on: Open the charging case, and the headphones
will automatically power on.
2. Shut down: Put the headphones into the charging case
and close the charging case to shut down.
3. Restore factory settings:
(In pairing mode)Double touch + long press 5S;
when the blue light ashes for 3 times, the headphones
will enter the factory reset mode, put the headphones into
the charging case, the headphones status will be restored
to the factory settings. You can open the cover to re-pair.
2