Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Solego setup
•
Look for a clean, dry and safe location inside the house. The Solego
will be mounted onto the wall. If you have multiple Solegos, stack
them on top of each other.
•
Avoid direct sunlight onto the Solego or cables.
•
Solar panel (not included): Connect the panel to one of the solar
ports of the Solego indicated by the engraving.
•
Loads: Connect lamps or other appliances to the load ports on the
side of the Solego. Water pumps and fridges need to be connected to
the load port on top of the Solego keypad. Phones can be charged by
using the USB ports (except the keypad port).
Start your system
•
After the panel, Solego and all appliances are placed correctly the
device will switch on automatically.
Solar panel installation
• Place the solar panel on your roof at
an angle of 10° to 30° pointing
towards the sun.
• For a maximum power generation
avoid any shading of the panel.
• Leave a small gap of around 5-10 cm
between the solar panel and roof to
allow ventilation and cooling.
• Clean the panel surface regularly. The
panel will get hot during the day -
wear gloves to avoid burns.
4
EN
Publicité
