Publicité
TOOLS & EQUIPMENT
… 2 people needed
…
2
x
… Wrench
…
… Electric Drill
…
With Drill Bit
… Philips head
…
Screwdriver
… Rubber Mallet
…
… Work gloves
…
… Needle Nose Pliers
…
… Ladder
…
… Tape measure
…
IMPORTANT ASSEMBLY STEPS
When encountering this information icon during assembly,
please refer the relevant assembly step for important additional
comments.
Do not cut the steel cable unless a final decision on the mounting location
has been made.
Step 3:
According to the ground surface type, follow the appropriate
mounting procedure.
Option 1: for hard surfaces (concrete or wood).
Option 2: soft/ground installation.
Step 5:
After the product has been installed, fasten the steel cable by
turning part #7332.
Tighten all screws when completing assembly.
Publicité
