Publicité
Les langues disponibles
Les langues disponibles
CARE & MAINTENANCE
AIR FILTER
The filter indicator will illuminate after 250 hours of
use, indicating that the filter should be cleaned.
Remove the filter from the back of the appliance.
Use a vacuum to remove dust from the filter or wash
with warm water and mild detergent. Ensure the
filter is completely dry before replacing it in the
appliance. Press the filter button to reset the filter
indicator.
Note: Do not operate the appliance without the air
filter installed.
LONG TERM STORAGE
Ensure that the inside of the appliance is dry before
storing for the off season to help avoid the growth
of mold or mildew. Ensure the filter is clean and dry.
Secure the power cord with the power cord strap as
per the image below. Store the appliance upright
and covered in a dry location.
CLEANING
To avoid possible electric shock, ensure that the
appliance is unplugged before performing any
cleaning or maintenance.
The outside of the appliance can be wiped clean
with a soft cloth or with a lukewarm, damp cloth if
necessary.
Do not use gasoline, benzene, thinner or any
other chemicals to clean this appliance as these
substances can cause damage to the finish and
deformation of plastic parts.
Never pour water directly onto the appliance as this
will cause deterioration of electrical components
and wiring insulation.
Ensure that the drain ports on the interior of the
appliance and the drain ports on the back of the
appliance are free of dirt and calcium build up.
ERROR CODES
EH - humidity sensor fault
E1 or E2 - temperature sensor fault
E3 - Gas leakage
DISPOSAL
This appliance may not be treated as regular
household waste, it should be taken to the
appropriate waste collection point for recycling of
electrical components. Check for local regulatory
compliance regarding approved and safe disposal
of this appliance.
13
Publicité
