Candi 605 E Mode D'emploi page 26

Problem
Selecting the
distribution button(A-
B) you cannot get a
beverage
The capsule is not
ejected
The lever (1) will not
slide properly
Solution
1) Fill the tank with water
2) Check if the water tank is well located
3) Lift the lever to permit air outlet take the capsule
off and wait for a while to let the pump be
cool, close the lever again and select the
distribution button(A-B)
4) Empty the capsule drawer and reset the coffee
function by switching the machine off and on
again with the main switch (9) for Mod. 605 E,
or by simultaneously pressing the dispensing
buttons (A-B) for Mod. 607
If the problem persists, contact your local service center
Close the lever (1), then slowly open it again
Press the start button (A-B) and slowly open the lever as water is being
delivered (1)
Press the start button (A-B), then open and close the lever (1) several
times while water is being dispensed
24
19